Cisco 8832 Manuel - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco 8832. Cisco 8832 30 pages. Masergy ip conference phone
Également pour Cisco 8832 : Manuel principal de migration des microprogrammes (31 pages), Manuel de l'utilisateur (20 pages), Manuel de démarrage rapide (2 pages), Manuel (30 pages), Manuel d'installation (39 pages), Manuel de démarrage rapide (16 pages), Manuel d'entretien (9 pages), Démarrage rapide (2 pages), Paramètres (14 pages), Manuel de démarrage rapide (2 pages), Manuel de reconfiguration (2 pages), Démarrage rapide (2 pages)

Imprimer la page
Cisco 8832 Manuel
Pair a Wireless Microphone
Step 3
Attach the microphone to the table mount plate. Magnets are embedded in the microphone to snap the unit
into place.
You can move the microphone and attached table mount to a different location on the table surface as needed.
Use care when moving to protect the unit.
Related Topics
Pair a Wireless Microphone
Before you begin
Unplug any wired microphones.
Procedure
Step 1
Press Settings.
Step 2
Select Device administration > Microphones > Wireless microphones.
Step 3
Select either Microphone 1 or Microphone 2 and press Pair.
If a microphone is already linked to a particular channel, the phone screen shows that the microphone is paired.
Step 4
Press Mute
If the pairing succeeds, the phone screen displays a success message.
Step 5
(Optional) Press Cancel to revert to the Wireless microphones menu.
Related Topics
Unpair a Wireless Microphone
Procedure
Step 1
Press Settings.
Step 2
Select Device administration > Microphones > Wireless microphones.
Step 3
Select either Microphone 1 or Microphone 2.
If the selected channel is paired, the Unpair softkey displays on the phone screen.
Step 4
Press Unpair.
Your Phone
12
Wireless Expansion Microphone (8832
Install the Wireless Expansion
on the wireless microphone until the microphone LED blinks white.
Wireless Expansion Microphone (8832
Only), on page 21
Microphones, on page 11
Only), on page 21
Your Phone