Epson EB-450W Manuel d'installation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Epson EB-450W. Epson EB-450W 21 pages. Ultrashort throw projector
Également pour Epson EB-450W : Manuel de démarrage rapide (16 pages), Spécifications (8 pages)
Imprimer la page
(2) Insert the slide plate into the setting plate from the interface side of the projector (
Align the marks on the projector and the setting plate (
Slide plate
Projector
interface side
(3) Tighten the two M5 x 12 mm hexagon socket head cap bolts (
Warning
If you use adhesives to prevent the screws from loosening or things such as lubricants or oils
on the slide plate fixing part of the projector, the case may crack and cause the projector to fall,
resulting in personal injury or property damage. Do not use adhesives, lubricants, or oils to
install or adjust the setting plate.
E
Connect the power cable and other cables to the projector
Connect any necessary cables such as the power cable, computer cable, and USB cable to the projector.
B
).
Power cable
USB cable
Computer cable
14
A
M5 x 12 mm hexagon
socket head cap bolts (2)
Bolt positions
Marks
C
).
).