Cisco 8865 Manuel - Page 39

Cisco IP Phone Accessories

Step 5

Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into

position.

Step 6

Proceed to

Remove the Phone from the Non-Lockable Wall Mount

The wall bracket has two tabs that lock the kit together. Use the following illustration to locate the tabs.

Figure 13: Tab Location

Before you begin

Obtain two Phillips head screwdrivers or other similar devices that have a diameter of 5 millimeters or 3/16ths

of an inch.

Procedure

Step 1

Insert a screw driver or other device into the left and right holes in the phone mounting plate. Insert to a depth

of about 3/4 of an inch or 2 centimeters.

Step 2

Press firmly inwards to disengage the tabs.

Adjust the Handset Rest, on page

Remove the Phone from the Non-Lockable Wall Mount

46.

Cisco IP Phone Accessories