Epson EB-485Wi Manuel d'installation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Epson EB-485Wi. Epson EB-485Wi 37 pages. Ultra-short-throw interactive projectors
Également pour Epson EB-485Wi : Spécifications (6 pages), Manuel de démarrage rapide (2 pages)

Imprimer la page

(2) Attach the slide plate to the projector.

Attach the slide plate to the projector using the M4 x 12 mm hexagon socket head cap bolts (x4)

supplied.

Slide plate

(3) Attach the 3-axis adjustment unit to the setting plate.

• Decide which position you want to install the 3-axis adjustment unit.

Mount it at the

stamp when the projection screen is less than 70 inches, or mount it at the

stamp when the screen is 70 inches or more.

: Less than 70 inches

• Tighten the M4 x 12 mm hexagon socket head cap bolts (x4) supplied to install the 3-axis adjustment

unit.

M4 x 12 mm hexagon socket

head cap bolts

Spring washer

Washer

Bolt installation positions

When the projection screen is less than 70 inches

M4 x 12 mm hexagon socket head cap

bolts

Spring washer

Washer

: 70 inches or more

When the projection screen is 70 inches or more