Epson EB-735F Supplément au manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Supplément au manuel de l'utilisateur pour {nom_de_la_catégorie} Epson EB-735F. Epson EB-735F 16 pages.
Imprimer la page
Details of User Operation Change (Version 2.00)
• We recommend selecting Yes. The next time you turn on the
projector and no signal is being input, the connection guide for
the wireless transmitter (Epson Wireless Presentation) is
a
displayed.
• The message prompting you to set Connection Guide Display
to On is displayed when Connection Guide Display is set to
Off and Content Playback is set to Off.
• You can change the connection guide display in the projector's
Network menu.
s Network > Transmitter Settings > Connection Guide
Display
e
Remove the wireless transmitter from the projector and insert the
wireless LAN module into the same port used for the wireless
transmitter.
f
Press the [Menu] button on the control panel or remote control.
g
Make sure Wireless LAN Power is set to On in the projector's
Management menu and Simple AP is set to On in the projector's
Network Settings menu.
We recommend turning the projector off and then back on to enable the
connection guide display.
If you set the Auto Power On setting to On in the projector's Network
menu, you can start projection even if the projector is in standby mode
(when the power is off).
a
s Network > Transmitter Settings > Auto Power On
Projecting with the Wireless Presentation System
You can use the paired wireless transmitter to quickly establish direct
connection between the projector (receiver) and Windows/Mac computers
and easily project your images.
Make sure the wireless LAN module is installed into your projector.
a
a
Turn on the projector.
b
Connect the wireless transmitter to a USB port on your computer.
c
Project your content with the Epson Wireless Presentation software in
the wireless transmitter. See the Epson Wireless Presentation System
User's Guide for details.
13