Cisco Cisco 7960 Manuel de l'utilisateur - Page 8

Imprimer la page

Cisco Cisco 7960 Manuel de l'utilisateur

Dialing:

ReDial:

Hold:

Call Park:

Call Back:

With Cisco phones you have several different options for placing a call.

Off-hook dialing:

Predialing:

On-hook dialing:

This will automatically dial the last called number from your phone.

To Activate:

Allows you to place a call on hold.

To Activate:

To Return to the call:

This allows you to park an active call and then retrieve it using another phone

within your phone system.

To Activate:

1. During an active call, press the More Softkey

until you see the Park tab.

2. Press the Park Softkey to park the call. The

LCD displays the number where the call is

parked.

3. Make a note of the Call Park number and hang

up.

4. To retrieve the parked call, go to any phone on campus

and dial the Call Park number.

Notifies you that a previously dialed on-campus number (with a busy tone) is

now available.

To Activate:

1. When you receive a busy tone, press the

CallBack Softkey. The phone will indicate that

Callback has been initiated against the DN just

called. You are now free to make any other call.

2. Once the far end goes idle your set will play a

special ring tone to let you know that the DN

has become available and a new "Dial" Softkey

will be displayed. Press it and it will redial the

original number for you.

Lift handset and dial the number.

Dial the number you want to call and either pick up

the handset which then initiates the call or press the

Dial Softkey (on a 7960 only) and this initiates the

call on the speakerphone if the handset is NOT

picked up.

Press the Speaker button and then dial (NOT offered

on 7912 set).

Lift handset and press the Redial Softkey.

During a call, press the Hold Softkey.

Press the Resume Softkey.