Cisco Cisco Access Registrar 4.2 Configuration des paramètres du réseau - Page 24
Parcourez en ligne ou téléchargez le pdf Configuration des paramètres du réseau pour {nom_de_la_catégorie} Cisco Cisco Access Registrar 4.2. Cisco Cisco Access Registrar 4.2 34 pages. Telepresence conference system
Également pour Cisco Cisco Access Registrar 4.2 : Manuel de l'utilisateur (44 pages), Manuel de démarrage (46 pages)
Imprimer la page
Configuring IP Settings
Step 7
Step 8
Step 9
Assigning DNS Servers
Using the Phone Configuration Web Page
Step 1
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-24
Enter the new domain name.
For information about entering values, see the
the Network Configuration Menu" section on page
Press Validat.
Press Save.
The DNS setting on the Cisco Unified IP Phone allows you to specify remote
computers by host names, which are character strings with some mnemonic value,
rather than by using IP addresses, which are simply strings of numbers.
The phones use DNS to resolve the host name of TFTP servers,
Cisco Unified CallManager systems, and web server host names when the system
is configured to use names rather than IP addresses.
To assign a DNS server for the Cisco Unified IP Phone, follow these steps:
Procedure
Display the Phone Configuration web page.
For instructions, see the
Configuration Web Page" section on page
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
To set the DNS servers:
To set DNS Server1, in the DNSServer1 field enter an address and click
a.
Apply.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
"Accessing Network Settings through a Phone
4-2.
"Guidelines for Editing Settings in
4-6.
OL-8617-01