Cisco Linksys WIP310 Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco Linksys WIP310. Cisco Linksys WIP310 35 pages. Wireless-g ip phone
Imprimer la page
Chapter1
Select Buttons and Arrows (Navigation Pad)
Select button and arrows
The select button is the silver button in the middle of the
navigation pad and can be used with almost every func-
tion and menu option .
The arrow buttons are used to move up, down, left and
right through some of the functions and menu options .
Soft Keys
left soft key
Call key
The silver soft keys are located under the left and right
sides of the display screen . In the standby mode, the left
soft key is for Optons, the right soft key is for Contacts .
The bottom left key with the blue handset symbol is the
Call key and is used to place and answer calls . The bot-
tom right key with the red phone symbol is the Power/
End call key and is used to power on the handset, end
calls and power off the handset .
Keypad
The keypad is used for dialing numbers, entering letters
and symbols . The current type of character being used is
displayed in the upper right corner of the screen .
Keypad
This System can use predictive text to "predict" what the
next letters will be and it will enter those letters . When
predictive text is being used, Aa or aa will display in the
upper right corner of the screen .
•
Press the #/P key to toggle between initial upper (Abc)
and lower case letters (abc) and predictive text (Aa or
aa) .
To enter a number, press and hold the number on the
•
keypad (not available for names) .
Wireless-G IP Phone
•
•
•
Ringer Volume
While the handset is in standby mode, press the left
arrow to decrease or the rght arrow to increase the ringer
volume .
Speaker
rght soft key
Power/End call
key
The speaker is on the back of the handset .
Speaker Button
Press the Speaker button to turn this feature on or off . You
will see the speaker symbol on the display screen when it
is enabled .
Headset
To use this feature, connect a headset with a 2 .5mm
connector to the port on the right side of the handset .
Product Overview
Press the zero (0) key to add a space .
Press the * key to display available symbols . Use the
arrow keys to highlight the symbol you want and press
OK (select button) .
To delete one character at a time, press the rght soft
keys.
Speaker
Speaker On/Off Button
Headset Jack