3Com SuperStack II Switch 3300 ATM Manuel d'installation rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 3Com SuperStack II Switch 3300 ATM. 3Com SuperStack II Switch 3300 ATM 6 pages. Atm expansion module
![3Com SuperStack II Switch 3300 ATM Manuel d'installation rapide](/uploads/products/server2/5361/5361.png)
2
C
: Q
I
HAPTER
UICK
NSTALLATION
Warning: Disconnect the Switch from the network,
power it off and then disconnect the Switch from the
main power supply.
Step 1:
Remove the blank plate that is located at the back of
the SuperStack II Switch, by unscrewing the two Phil-
lips screws as shown in Figure 1.
Retain the blank plate and the screws for future use.
Figure 1 Removing the Blank Plate
Blank Plate
G
S
S
II S
1100/3300 ATM E
UIDE FOR THE
UPER
TACK
WITCH
M
XPANSION
ODULE
Step 2:
Hold the module with the cutout on your front left
side,without touching the top or bottom of the circuit
board. Use the guide rails within the switch slot to
align the ATM Expansion Module as shown in
Figure 2.
Slide the ATM Expansion Module into the slot. Ensure
that the module is fully engaged to the switch. You
should hear a click.
Figure 2 Aligning and Inserting the ATM Expansion Module
Cutout