Ricoh Aficio CL3000 Manuel d'installation rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Ricoh Aficio CL3000. Ricoh Aficio CL3000 4 pages. Sap printing
Également pour Ricoh Aficio CL3000 : Manuel (49 pages), Manuel d'installation (3 pages), Manuel complémentaire (3 pages), Manuel des options (48 pages), Manuel complémentaire (38 pages), Manuel (12 pages)
![Ricoh Aficio CL3000 Manuel d'installation rapide](/uploads/products/server2/5361052/5361052.png)
Press the { } or { } key to display "TCP/
CONFIGURING THE PRINTER
IP", and then press the {Enter #} key.
FOR THE NETWORK
Active Protocol:
You must configure the printer setting using the
control panel when using in a network environment.
TCP/IP
The following list is the items you can set and their
Press the { } or { } key to display "Active",
default settings.
and then press the {Enter #} key.
DHCP
On
TCP/IP:
IP Address
011.022.033.044
*Active
Subnet Mask
000.000.000.000
Note
Gateway Address
000.000.000.000
* shows the current setting.
Frame Type (NW)
Auto
In about two seconds, the display returns to the "Active Protocol"
Active Protocol
TCP/IP
setting screen.
Ethernet
Auto
Set the rest of the protocols for use.
When all settings for the protocol are done,
The procedure below shows how to set the TCP/IP
protocol. Make the settings for the other items by
press the {Escape} key.
taking the same procedure.
The "Network Setup" setting screen appears.
Press the {Menu} key.
Note
"Menu" appears on the panel display.
The default settings for all of the protocols are
"Active".
Menu:
It is recomended to set the unused protocols "Not
Paper Input
Active".
When you use this machine under DHCP
Press the { } or { } key to display "Host
environment, go to step
Interface", and then press the {Enter #} key.
machine with a fixed IP address, you must make
the setting for the required item after making the
Menu:
setting for DHCP Off. Go to step .
Host Interface
Important
The interface setiing menu appears.
When DHCP is On, you cannot make the setting for
Start the protocol for use.
the following menus:
IP Address
Subnet Mask
Press the { } or { } key to display
Gateway Address
"Network Setup", and then press the {Enter
Note
#} key.
Consult the network administrator for information
about how to make the setting for the network
Host Interface:
Make the setting for DHCP Off.
Network Setup
Press { } or { } to display "DHCP", and
Press the { } or { } key to display "Active
then press {Enter #}.
Protocol", and then press the {Enter #} key.
Network Setup:
Network Setup:
DHCP
Active Protocol
Press { } or { } to display "Off", and then
press {Enter #}.
DHCP:
*Off
Note
* shows the current setting.
In about two seconds, the display returns to the "Network Setup"
setting screen.
Set the IP address for the printer.
Note
Confirm the IP address to the network administrator.
Press the { } or { } key to display "IP
Address", and then press the {Enter #} key.
Network Setup:
IP Address
The currently selected IP address appears.
Note
When the {Enter #} key is pressed, the cursor moves
to the next field.
When the { } or { } key is kept pressed for a few
seconds, the value chages by 10.
Press the { } or { } key to set the value
for the field.
IP Address:
199.022.033.044
Press the {Enter #} key.
The cursor moves to the next field.
Repeat
and
to set the value for the rest
of the fields.
. When you use this
Set "Subnet Mask" and "Gateway Address" by
following the same procedure for setting the IP
address.
Important
The subnet mask is the mask value to use a part of
the IP address as a network address. Confirm the
value to the network administrator.
The gateway address is the address of the host or
router that acts as a gateway when interacting with
work stations in another network. Confirm the value
to the network administrator.
Note
If you are not sure of the setting addresses, leave
them as default.
When all of the settings are done, press the
{On Line} key.
"Ready" appears on the panel display.
Ready
Print the configuration page to confirm the settings
made.
See
"PRINTING THE TEST PAGE" for printing the configuration
page.
Select [Quick Install].
INSTALLING THE PRINTER
The software license agreement appears in the [License Agreement]
DRIVER
dialog box.
You can install the printer drivers and software
easily from the CD-ROM labeled "Printer Drivers
and Utilities".
The supported operating systems are Windows 95/
98/Me, Windows 2000, Windows XP and Windows
NT 4.0.
Click [Quick Install] in the window of the CD-ROM
to install PCL5c and RPCS printer drivers. To install
the PostScript 3 printer driver, click the [PostScript
3 printer driver] button. For more information about
the PostScript 3 printer driver, see the Administrator
This is an example when English is selected in step
Reference or the Client Reference on the CD-ROM
labeled "Operating Instructions" depending on the
After reading through all of the contents, click [I
environment you use in.
accept the agreement] to agree with the License
When the TCP/IP protocol is used, SmartNet-
Agreement, and then click [Next].
Monitor for Client will be installed as well.
When using with TCP/IP protocol, confirm the followings:
The printer is connected to a network with
the network interface cable.
The TCP/IP protocol is set.
The IP address is set for the printer and the
computer.
Insert the CD-ROM labeled "Printer Drivers and
Utilities" into the CD-ROM drive.
Select the printer model you want to install in the
Auto Run will start the installer.
"Select Printer" dialog box.
Select a language to change the interface
language, and then click [OK].
The following languages are available:
Cestina (Czech), Dansk (Danish), Deutsch (German), English
(English), Espanol (Spanish), Francais (French), Italiano (Italian),
Magyar (Hungarian), Nederlands (Dutch), Norsk (Norwegian),
Polski (Polish), Portugues (Portuguese), Suomi (Finnish), Svenska
(Swedish)
Default interface language is English.
Note
For a network connection with TCP/IP, select the
printer whose IP address is displayed in [Connect
to].
For parallel connection, select the printer whose
printer port is displayed in [Connect to].
Click [Install].
The following display appears while installing the printer driver.
When finished, the [Installation Completion] dialog box appears.
.
Note
Under Windows 2000, the [Digital Signature Not
Found] dialog box may appear when installing the
printer driver. In this case, click [Yes] to continue
the installation.
Under Windows XP, the [Hardware Installation]
dialog box may appear. In this case, click [Continue
Anyway] to continue the installation.
Click [Finish].
Note
A message directing to restart the computer may
appear. In this case, restart your computer to
complete the installation. If no a message appears,
go to step
.
Click [Exit].
The installation is now complete.
Copyright © 2002 G081-6520
Printed in The Netherlands
EE GB