Ricoh MP C3503 Manuel - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Ricoh MP C3503. Ricoh MP C3503 44 pages. Envelope printing, setup & printing
Également pour Ricoh MP C3503 : Manuel d'utilisation rapide (20 pages), Référence rapide Manuel de copie (1 pages), Brochure & Specs (12 pages), Manuel de l'utilisateur (36 pages), Manuel de configuration des fonctions (5 pages), Manuel de l'administrateur (48 pages), Exercice de formation (4 pages)

3. Other Information for This Machine

This chapter describes laws and regulations related to this machine.

Do not copy or print any item for which reproduction is prohibited by law.

Copying or printing the following items is generally prohibited by local law:

bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.

The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its

completeness or accuracy. If you have any questions concerning the legality of copying or printing

certain items, consult with your legal advisor.

This machine is equipped with a function that prevents making counterfeit bank bills. Due to this function

the original images similar to bank bills may not be copied properly.

Laser Safety for Type 1 and 2

CDRH Regulations

This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This

equipment contains four AlGaInP laser diodes, 655–663 nanometer wavelength for each emitter. The

beam divergence angle is 21 degrees (minimum) and 29 degrees (maximum) in the vertical direction,

and 7 degrees (minimum) and 11 degrees (maximum) in the horizontal direction, and laser beams are

generated in Continuous Wave (CW) mode. The maximum output power of the light source is 10

milliwatt.

Caution:

Use of controls or adjustments or performance of procedures other than those specified in the manuals

might result in hazardous radiation exposure.

Laser Safety for Type 3, 4, and 5

CDRH Regulations

This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This

equipment contains four 4ch-Laser Diode Arrays (4ch-LDA). Laser diodes are AlGaInP, 657–663