Ricoh P7026N Bulletin technique - Page 20

Parcourez en ligne ou téléchargez le pdf Bulletin technique pour {nom_de_la_catégorie} Ricoh P7026N. Ricoh P7026N 46 pages.

Model:

K-P1, A-C2, J-P1

3) For the customer using a 100Base fixed hub:

Temporary solutions:

Perform both of the following:

a) Set the network (ethernet) speed of the machine to 10Mbps.

The default setting of the machine is "Auto." This setting can be changed in the

"Network Setup" in the user mode "Host Interface" ("Interface Settings" in the

"System Settings" for the Model A-C2).

b) Install a dual speed hub between the 100Base fixed hub and the machine.

End of procedure for the customer using a 100Base fixed hub.

Note:

There is almost no effect on actual print time when the machine's network speed setting

is changed from 100Mbps to 10Mbps.

Permanent Countermeasure:

An interface board (GW-MAC) and a DIMM which contains firmware to drive the board

will be supplied for attachment to the controller board. With these parts, the machine will

work without installing a dual speed hub.

Detailed information on the interface board (GW-MAC) will be announced separately in

mid July.

echnical

Network

100Base fixed hub

Originally used by

the customer.

ulletin

Date:

10Mbps

100Mbps

Dual speed hub

Install a dual

speed hub

No.:

03-Jul-01

Set the network

speed to 10Mbps

PAGE: 2/3

RG058007