Ricoh Pro L5130e Manuel de paramétrage - Page 33

Parcourez en ligne ou téléchargez le pdf Manuel de paramétrage pour {nom_de_la_catégorie} Ricoh Pro L5130e. Ricoh Pro L5130e 44 pages. Additional function 2
Également pour Ricoh Pro L5130e : Manuel (12 pages)

Imprimer la page
Ricoh Pro L5130e Manuel de paramétrage
• You can update the media width by clicking [Update Size].

Specifying SNMP Community Name

You can specify the SNMP community name.
Normally, you do not need to change this setting. Only if this setting differs from the machine setting,
adjust it to match the machine setting.
Checking the machine setting
1.
Connect to the printer with the web browser and log in in administrator mode.
For details, see "Using Web Image Monitor", Operating Instructions.
2.
Open "SNMP Settings" in "SNMP".
3.
Make a note of the SNMP community name.
Checking/specifying the ColorGATE Productionserver community name
1.
Click [Printer] on the menu bar, and then click [Properties].
The printer property screen is displayed.
2.
Click the [Printer Port] tab.
3.
In "Configuration for SNMP communication:", check the community name. If it differs from
the SNMP community name on the printer, change it to match it with the machine setting.
You can enter 1 to 15 single-byte alphanumeric characters.
4.
Click [OK].
Follow the instructions on the screen to restart the RIP software.
M0DYIC0133
Other Functions
31