Ricoh Provence-P2W Manuel d'entretien - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Ricoh Provence-P2W. Ricoh Provence-P2W 48 pages. Machine code: j006

Imprimer la page
15 July 2005
992
A
Waste Tank Full Error
At power on, the printer detected
that the waste tank was full.
993
A
Charge Leak
At power on or during a print job,
a leak detection signal was
detected. The signal was
triggered by the accumulation of
condensation or ink spillage onto
the transport belt.
994
B
Vertical Motor Error
The vertical encoder input signal
was judged to be abnormal
when the vertical motor was
operating.
996
A
No Input Signal from the Horizontal Encoder
No input signal from the
horizontal encoder was detected
during operation of the
horizontal motor.
997
A
Input Signal from the Horizontal Encoder Abnormal
When the carriage moved to the
right, the carriage did not stop at
the HP. Or, the carriage scan
check failed.
999
A
Maintenance Motor Out of HP
The maintenance motor HP
sensor failed to detect the motor
at the home position.
• Check the waste tank full sensor
connection.
• Replace the ink full waste tank.
• Clean the transport belt.
• Replace the high voltage power supply
unit.
• Send the printer to the repair center.
• Horizontal encoder defective
• Horizontal encoder sensor defective.
• Send the printer to the repair center.
• Horizontal encoder defective
• Horizontal encoder sensor defective.
• Send the printer to the repair center.
• Maintenance motor on the maintenance
unit defective
• Maintenance motor HP sensor defective
• Replace the maintenance unit
15
TROUBLESHOOTING