8. Press the Dial soft key to dial the number.
9. To exit the directory, press the Exit button.
Program Personal Speed-Dial Buttons
Once an administrator has defined one or more speed-dial instances for a Cisco Unified IP phone, you can reprogram numbers
that are not locked or program numbers into an instance that has an empty dial string by following these steps:
1. Select an available phone line by lifting the handset, by pressing the NewCall soft key, or by pressing a line button. Listen
for the dial tone.
2. Press the pound key (#).
3. Press the Menu button, press 4 on the keypad for Speed Dial, and use the Navigation button to select the speed-dial button
that you want to program. A short beep confirms that you are starting to program this button.
4. Enter the speed-dial number. The digits appear on the phone display. Use the backspace (<<) soft key to erase digits that
were entered incorrectly.
To remove a speed-dial number without replacing it with a new one, press the pound key (#).
5. Hang up the handset, or press a new speed-dial button and repeat the process.
View Call History
To access Cisco Unified CallManager Express phone services, including missed, received, or placed calls, perform the following
steps:
1. Press the Menu button.
2. Press 2 on the keypad, or use the Navigation button to locate Directory, and press the Select soft key.
3. Use the Navigation button to scroll through the menu. Press the Select soft key to make your selection, or
Press 1 on the keypad for Missed Calls.
–
Press 2 on the keypad for Received Calls.
–
Press 3 on the keypad for Placed Calls.
–
4. Use the Navigation button to scroll through the call list.
5. Use the Select soft key to select a phone number.
6. Press the Dial soft key to place a call, or press the Exit soft key to return to the previous directory menu.
Place a Call from Call History
To place a call to a number in the call history list, perform the following steps:
1. Use the Navigation button to scroll through the call history list.
2. Use the Select soft key to select a phone number. The digits appear on the phone display.
3. To dial the number as it appears on the phone display:
Press the Dial soft key.
–
To edit the number on the phone display before dialing, use one of the following options:
Press the EditDial soft key to place the cursor at the beginning of the number on the phone display.
–
Use the keypad to edit the digits as needed. Use the backspace (<<) soft key to erase digits that were entered incorrectly.
–
Press the Dial soft key to place the call.
–
Clear Call History
To clear all call history lists, perform the following steps:
1. Press the Menu button.
2. Press 2 on the keypad, or use the Navigation button to locate the Directory, and then press the Select soft key.
3. Press the Clear soft key.
7
Imprimer la page