Ricoh Ri 1000 Manuel de dépannage - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Ricoh Ri 1000. Ricoh Ri 1000 27 pages. Procedure for long-term storage
Également pour Ricoh Ri 1000 : Manuel de l'utilisateur (9 pages), Manuel d'entretien de l'utilisateur (7 pages), Manuel (22 pages)

Imprimer la page
Ricoh Ri 1000 Manuel de dépannage
Set internal flag of ink charging status. Should be matched with actual situation of the printer
after replacing the Android Board. (display) or CTL or if you want to charge in a state you are already
in. (ie. You want to set After Ink Charging when initially ink charging was not successful and you
want to repeat)
⚫
After Ink Charging: Ink has been charged in the printer.
⚫
After Cleaner Charging: Cleaner has been charged in the printer.
⚫
After Ink Without White: Cleaner for white channels and Ink for color channels has
been charged
In the case where you suspect that an ink charging has not been completed successfully. (1 or
more carts do not show the expected % drop and visually 1 or more of the tubes do not seem to
be charged correctly) You can:
Set the Ink stage to what it was prior to you attempting at ink charging. Example. You are
setting a machine for storage, so you charged with cleaning fluid and you noticed one line not
completely cleared of ink. The printer is now in the After cleaner charging ink state. You can
change the ink state back to After ink charging in the service menu.
Finally – set the initial charging flag correctly