Cisco UNIFIED 9971 Manuel de l'utilisateur - Page 37

Flinders

Connecting

Mute

Mute allows you to block audio input for your handset, headset, and speakerphone,

so that you can hear other parties on the call but they cannot hear you.

When the Separate Audio and Video Mute feature is enabled, you mute the audio but

continue to transmit a video image when you press Mute during a video call. This

allows the other parties to see you but not to hear you. When this feature is disabled,

you mute both the audio and the video image when you press Mute during a video

call.

The Separate Audio and Video Mute feature is disabled by default. See your

administrator to have it enabled.

On-hook dialing allows you to enter a phone number before getting a dial tone and

then lift the handset to complete the call.

Step 1 Enter or speed-dial a phone number.

The On-Hook Dialing screen displays.

Step 2 Press Call. If you are specifying an Abbreviated Dial, enter the abbreviated

number and then press Speed Dial.

Step 3 Lift the handset, or press Speakerphone or Headset.

Step 4 If you hear a tone and see the message Enter Authorization Code, enter the

Forced Authorization Code (FAC) given to you by the ITS Service Desk.

Step 5 If you hear a tone and see the message Enter Client Matter Code, enter the

Client Matter Code (CMC) given to you by the ITS Service Desk.

If authorized by the system, the call proceeds.

Step 1 Press and hold star (*) for at least 1 second.

The plus (+) sign displays as the first digit in the phone number.

The corresponding tone stops to indicate that the * has changed to a + sign.

Step 2 Dial the international number.

Redial allows you to call the most recently dialed phone number.

Step 1 To place the call on any phone line, press Redial.

Step 2 To place the call on a specific phone line, select the line to obtain dial tone

and press Redial.

CRICOS No. 00114A