Ricoh Aficio SP 5200S Manuel initial - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel initial pour {nom_de_la_catégorie} Ricoh Aficio SP 5200S. Ricoh Aficio SP 5200S 48 pages. Ricoh initial guide for scanner and fax
Également pour Ricoh Aficio SP 5200S : Manuel d'information sur la sécurité (36 pages), Manuel rapide (6 pages)
Imprimer la page
Preparation for Sending Scanned Files via a
Network
This section describes how to configure the machine to send scanned files via a network.
Check that the network cable is properly connected to the machine.
The network settings described here are for connecting the machine to an IPv4 network using an
Ethernet cable. Note that the settings you must configure vary depending on your operating
environment.
For details about the machine connection and network settings, see "Connecting the Machine",
Network and System Settings Reference
The following is a list of procedures that you need to do:
No.
Procedure
(1)
Configuring [Machine IPv4 Address] /
[IPv4 Gateway Address] / [Effective
Protocol]
(2)
Configuring [SMTP Server]
(3)
Configuring [DNS Configuration]
(4)
Configuring [Scanner Features]
(5)
Creating a shared folder on the
computer
(6)
Registering a destination in the Address
Book
*1 This setting is required if you use the machine in a Windows Active Directory network.
Before configuring the machine
Confirm the following machine information in advance:
• Machine IPv4 Address / IPv4 Gateway Address (required in procedure (1))
The machine's IPv4 address and gateway address
• SMTP Server (required in procedure (2))
The SMTP server's IPv4 address or server name
• DNS Configuration (required in procedure (3))
Preparation for Sending Scanned Files via a Network
.
Requirements for each type of destination
E-mail
Necessary
Necessary
*1
As required
As required
Not required
As required
Computer's
FTP server
shared folder
Necessary
Necessary
Not required
Not required
As required
As required
As required
As required
Necessary
Not required
As required
As required
1
9