Ricoh D106 Manuel d'assistance produit - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'assistance produit pour {nom_de_la_catégorie} Ricoh D106. Ricoh D106 44 pages.
Imprimer la page
Installation
Installation Requirements
Temperature Range:
Humidity Range:
Ambient Illumination:
Ventilation:
Ambient Dust:
Avoid areas exposed to sudden temperature changes:
Areas directly exposed to cool air from an air conditioner
Areas directly exposed to cool from a heater.
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,500 ft.) above sea level.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2")
Do not place the machine where it may be subject to strong vibrations.
Machine level
Machine level
Power Requirements
Input voltage level: 110 - 120 V, 60Hz: 12A
Do not place anything on power cord.
The required wall outlet is a NEMA 5-15R (receptacle)
Space
Foot Print
mensions: W 587mm x D 655mm x H 725mm / 23.1"x25.8"x28.5" (w/o ARDF)
Di
Dimensions: W 587mm x D 655mm x H 845mm / 23.1"x25.8 x33.3" (with ARDF)
Measurement Conditions: Without Finisher installed and bypass table closed
NOTE:
Ver.1.5
Product Support Guide
Model D104/D106
10° C to 32° C (50° F to 89.6° F)
15% to 80% RH
Less than 1,500 lux (do not expose to direct sunlight)
3 times/hr/person
3
Less than 0.075 mg/m
(2.0 x 10-6oz/yd
Front to back: within 5mm (0.2") of level
Right to left: within 5mm (0.2") of level
Page 9 of 43
Subject to change without notice
3
)
A (Front)
Over 100m(3.9")
B (Left)
Over 100m(3.9")
C (Rear)
Over 315m(12.4")
D (Right)
Over 400m(15.7")
12/9/2011