Ricoh Container Stacker Instructions de déballage et d'installation - Page 15
Parcourez en ligne ou téléchargez le pdf Instructions de déballage et d'installation pour {nom_de_la_catégorie} Ricoh Container Stacker. Ricoh Container Stacker 49 pages.
Imprimer la page
Installation Configuration
The table below shows the configuration of Printer and Post devices. Installation of
each configuration should be done according to the reference page shown the in table
below.
Configuration
1
2
3
4
Prepare the Printer
70/92 ppm
1. Remove the 2000 sheet hopper.
M4 Screw
2. Turn the four leveling bolts until the casters do not touch the ground.
3. Place a level on the Printer frame and adjust the leveling bolts until horizontal
level is achieved.
Level
1-10
Container Stacker Installation Instructions
Container
Container
Printer
Stacker 1
Stacker 2
x
x
x
x
x
x
Paper Guide
Lever
Standard
Standard
Finisher
Finisher
DDP70e
DDP92/184
x
x
x
x
2000 Sheet Hopper
Caster
Leveling Bolt
Reference
Page
8
8, 16
8, 21
x
8, 24
Floor
Gap
(Max 1mm)