Ricoh PJ WX5140 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ricoh PJ WX5140. Ricoh PJ WX5140 18 pages.
Également pour Ricoh PJ WX5140 : Spécifications (4 pages)

Imprimer la page

-Disable the password when enabled.

Check "Disable" in PJLink password.

Enter the current password in current password box.

Click [Apply] button.

<Note>

-Up to 32 alphanumeric characters and symbols are accepted for a password.

-When entered the new password and the confirm password are not the same, an error message

will be displayed. Re-enter passwords in this case.

Network setting

Network settings such as IP address can be set in this section.

DHCP, IP address, and Default gateway can be also set OSD menu in the projector.

DNS Server address can be set only in this section. This is required when E-mail setting is set by

domain names.

-Check DHCP when network settings are provided by DHCP server in your network.

-Check Manual when you want set network settings manually.

And enter the settings to following boxes.

[IP Address], [Subnet mask], [Default gateway], [DNS server]

After settings are changed, click [Apply] button to apply new settings.

<Note>

IPv6 is not supported.

Password setting:

Passwords setting for web pages can be changed in this section.

A password for "Administrator" and "User" can be set independently.

-Change the password.

Confirm "Enable" is checked in Administrator or User.