Ricoh PJ X3340 Notes à l'attention des utilisateurs - Page 2
Parcourez en ligne ou téléchargez le pdf Notes à l'attention des utilisateurs pour {nom_de_la_catégorie} Ricoh PJ X3340. Ricoh PJ X3340 2 pages. Desk edge projection system
Également pour Ricoh PJ X3340 : Spécifications (4 pages), Manuel de démarrage (2 pages)
Imprimer la page
5. Attach the intake vent cover to the projector.
Insert the intake vent cover from its bottom to the opening on the projector, and then close
the cover by pushing the tab at the top of the cover.
Make sure that the intake vent cover is installed correctly. Otherwise, dirt and dust may enter
the projector through any gaps and cause it to stop or malfunction.
The message is displayed for approximately 30 seconds every 500 hours after the
projector is first turned on. The display closes when operation starts.
Depending on the environment in which the projector is located, the filter may get
clogged earlier than expected. When any dust or dirt has visibly collected on the air filter,
clean it regardless of whether the warning message is displayed or not. A buildup of dust
on the air filter may cause poor ventilation, causing the interior of the projector overheat
and operations to stop or malfunction.
© 2015 Ricoh Co., Ltd.
EN GB EN US EN AU
Y051-7508