Epson ELPMB47 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson ELPMB47. Epson ELPMB47 16 pages.

Adjusting the Installation Position

Warning

v Never loosen or remove any screws needlessly when adjusting the position.

Doing so could cause the projector to fall and lead to an accident.

v Retighten all screws and make sure that they are not loose after adjustment.

When the images are projected higher or lower compared to the screen, adjust the projection

position using the lens shift of the projector.

When moving the projection position vertically over the adjustable range of the lens shift, the

projection position can be adjusted another 5 degrees in either direction by tilting the

projector.

When tilting the projector, the projected images may be twisted. The images twisted in a

trapezoidal shape can be corrected by using the keystone adjustment.

However, the image goes out of focus as the inclination angle increases.

For details on the lens shift and keystone, see the "User's guide" supplied with the projector.

Procedure

Loosen the two screws for the vertical angle

adjustment points on the left and right using

the supplied M8 hexagon wrench.

Tilt the rear of the projector vertically to

adjust the angle until the position of the

projected images fits the screen.

After adjusting the angle, secure the screws

on both sides using the M8 hexagon wrench.