Ricoh Aficio MP C5000 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ricoh Aficio MP C5000. Ricoh Aficio MP C5000 41 pages. Papercut ricoh embedded manual
Également pour Ricoh Aficio MP C5000 : Brochure & Specs (8 pages), Manuel de référence rapide (42 pages), Manuel de démarrage rapide (19 pages), Manuel de démarrage rapide (45 pages), Manuel de dépannage (23 pages)

PaperCut – Ricoh Embedded Manual

5. Make sure all the options are NOT enabled (i.e. not highlighted).

2.2.6.2 Enabling Enhanced External Charge Unit support

Once the system parameter has been enabled, the Enhanced External Charge Unit on the

device should be enabled as follows:

1. Go to the Ricoh admin/settings by pressing the "User Tools/Counter" hard key (on

the top left of the device panel).

2. Select the "System Settings" button

3. Select the "Administrator Tools" tab

4. Select the "Enhanced External Charge Unit Management" button (usually on the

bottom left of the 2

different SDKs).

5. Enable all of the "Copy" options (e.g. Full Color, Black and White , Two-Color, Single

Color).

6. Enable the "Document Server" option (because this is an alternate way to perform

copying and this should be locked/tracked too).

7. (Optional) To restrict/track Faxing and Scanning, also enable the "Facsimile" and

"Scanner" options. You will need to do this if you enable "Track & Control scanning"

and "Track & control faxing" for this device in PaperCut.

8. IMPORTANT: Ensure that you do NOT enable the "Printer" options because this will

cause print jobs to be blocked by the device.

9. Press OK to save the changes.

To verify that the enhanced external charge unit is enabled properly, exit out of the "System

Settings", and then select the "Copier" button. If the charge unit is enabled properly the

Revision: 19

page, -see screenshot, although location may vary slightly for

If this button is disabled see section 2.2.5 above.

2012-10-26

9 of 41