Cisco 10/100 16-Port VPN Router RV016 Manuel d'installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Cisco 10/100 16-Port VPN Router RV016. Cisco 10/100 16-Port VPN Router RV016 2 pages. Cisco systems 10/100 16-port vpn router quick installation

Imprimer la page

Your Internet/WAN Connection Type

From the WAN Setting drop-down

menu, select how many WAN ports

you want to use. The default is 2,

and the maximum number is 7. You

can also change the number of

WAN ports using the Port Setup page

of the Port Management tab. If you

change the number on this screen,

The Network Setup screen

then the number on the Port Setup

screen will change accordingly.

Make sure the network configuration

matches the number of WAN port

settings on this screen.

If you change the number of WAN

ports, a confirmation message will

appear. Click the OK button to save

the new setting. You must save this

setting before you can click Edit to

change the settings of any new WAN

ports. The Connection Type will dis-

play the word "Undefined" if you

have not changed the WAN settings

of the selected WAN port.

The WAN Setting table will display the

WAN port numbers in the Interface

column and their respective con-

nection types in the Connection

Type column. Click Edit in the Con-

fig. column to change the WAN set-

tings of the selected WAN port. The

default Connection Type of WAN1

and WAN2 is Obtain an IP automati-

cally.

Model No.

In the drop-down menus for WAN1

through WAN7, the WAN Connection

Type setting features four Internet

connection types: Obtain an IP

automatically, Static IP , PPPoE, and

PPTP . Depending on which connec-

tion type you select, the features

available on the Network page of

the Setup screen will differ. Proceed

to the instructions for the connection

type you are using.

1 Obtain an IP Automatically

If your ISP says that you are

connecting through DHCP or a

dynamic IP address from your

ISP , then select Obtain an IP

automatically as the WAN

Connection Type. If you also

select Use the Following DNS

Server Addresses, enter a spe-

cific DNS Server IP Address.

Click the Save Settings button,

and go to Step G.

2 Static IP

Obtain an IP automatically

If your ISP says that you are

connecting through a static or

fixed IP address from your ISP ,

then select Static IP as the WAN

Connection Type.

Enter the WAN IP Address, Sub-

net Mask Default Gateway

Address, and DNS Server pro-

vided by your ISP .

Static IP

In the DNS Server fields, enter

the DNS address(es) provided

by your ISP . You need to enter

at least one DNS address.

Click the Save Settings button,

and go to Step G.

3 PPPoE

If your ISP says that you are

connecting through PPPoE or if

you normally enter a user

name and password to access

the Internet, then select PPPoE

as the WAN Connection Type.

Enter the User Name and Pass-

word provided by your ISP .

If you select Connect on

Demand, the PPPoE connec-

tion will be disconnected if it

has been idle for a period

PPPoE

longer than the Max Idle Time

setting.

If you select Keep Alive, the

Router will keep the connec-

tion alive by sending out a few

data packets at the Redial

Period, so your Internet service

thinks that the connection is still

active.

Click the Save Settings button.

Go to Step G.

PPTP

4 PPTP

PPTP is a service used in Europe and

Israel only. IF you are using a PPTP

connection, check with your ISP for

the necessary setup information.

When you are finished, go to Step G.

If you haven't already done so,

click the Save Settings button.

Then, close the web browser.

Power your cable or DSL

modem off and back on

again.

For additional information or troubleshooting

Restart or power on your PCs so

help, refer to the User Guide on the Setup CD-

they can obtain the Router's

ROM. You can also call or e-mail for further

new settings.

support.

24-hour Technical Support

To test the Router's settings,

800-326-7114

open your web browser from

(toll-free from US or Canada)

any computer. In the browser's

E-mail Support

Address field, enter

[email protected]

www.linksys.com/registration

Website

http://www.linksys.com or

and press the Enter key.

http://support.linksys.com

RMA (Return Merchandise Authorization)

http://www.linksys.com/support

Congratulations! The installation of

FTP Site

the Router is complete.

ftp://ftp.linksys.com

Sales Information

800-546-5797 (800-LINKSYS)

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

RV016-QI-40202NC KL