Cisco 10005 ESR Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco 10005 ESR. Cisco 10005 ESR 33 pages.

Chapter 3

Maintaining the Cisco 10005 ESR

Step 5

Step 6

Replacing the Fan Assembly

Caution

Step 1

Step 2

Warning

OL-1102-07

To replace the filter cover, insert the tab on the bottom of the cover into the slot at

the bottom of the air filter compartment. Pivot the cover up into place.

Turn the cam fastener ½ of a rotation (180 degrees) to secure the filter to the

chassis.

The fan assembly supports hot-swapping (for up to 2 minutes) and can be replaced

without interruption to system operation.

The fan assembly is accessible from the rear of the chassis. It occupies a vertical

slot on the right side of the unit.

To prevent the system from overheating, be sure that the replacement fan

assembly is out of its box and packaging, so it is ready to install as soon as the

defective module is removed.

To replace the fan assembly:

Move any interface cables away from the fan assembly.

Loosen the captive screw on the fan assembly and slide the assembly out of the

chassis

(Figure

3-4).

The fans might still be turning when you remove the fan assembly from the

chassis. Keep fingers, screwdrivers, and other objects away from the openings

in the fan assembly's housing.

Cisco 10005 ESR Hardware Overview and Maintenance Guide

Removing and Replacing Field-Replaceable Units

3-9