Cisco 10008 Manuel de démarrage rapide - Page 40

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 10008. Cisco 10008 49 pages. Cisco systems router quick start guide

Imprimer la page

Formatting Flash Disks and Flash Cards

The Flash disk or Flash card that shipped with your router contains the default Cisco IOS image for booting your router. This

section explains how to format an ATA Flash disk, modify its contents, or resolve a problem with the Flash card.

The formatting procedure erases all information on Flash memory disks or Flash cards.

Caution

ATA Flash disks and Flash cards use similar commands. The primary syntax change is that disk0: or disk1: refers to ATA Flash

disks, while slot0: or slot1: refers to Flash memory cards.

Use the following procedure to format a Flash disk:

To format a Flash disk, you should be in privileged EXEC mode.

Step 1

Ensure there is a Flash disk in slot 0 or slot 1 of the PRE.

Step 2

Enter the format diskn: command at the privileged EXEC mode prompt to format the disk.

Step 3

The following example shows the display after you enter the format disk0: command:

Router# format disk0:

All sectors will be erased, proceed? [confirm]

Enter volume id (up to 30 characters): MyNewdisk

Formatting sector 1

Format device slot0 completed

The Flash disk is now ready for use.