Cisco 12000 - Series Chassis Modular Expansion Base Manuel de dépannage du matériel - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de dépannage du matériel pour {nom_de_la_catégorie} Cisco 12000 - Series Chassis Modular Expansion Base. Cisco 12000 - Series Chassis Modular Expansion Base 18 pages. Internet router line card failures
Également pour Cisco 12000 - Series Chassis Modular Expansion Base : Fiche technique (9 pages), Manuel de synthèse (6 pages), Manuel d'instructions de remplacement (40 pages)
Imprimer la page
Cisco - Hardware Troubleshooting for Cisco 12000 Series Internet Router Line Card Failures
Launching a Field Diagnostic for slot 3
Downloading diagnostic tests to slot 3 (timeout set to 600 sec.)
*Nov 18 22:20:40.237: %LINK-5-CHANGED: Interface GigabitEthernet3/0,
changed state to administratively down
Field Diag download COMPLETE for slot 3
FD 3> *****************************************************
FD 3> GSR Field Diagnostics V4.0
FD 3> Compiled by award on Thu May 18 13:43:04 PDT 2000
FD 3> view: award-conn_isp.FieldDiagRelease
FD 3> *****************************************************
FD 3> BFR_CARD_TYPE_1P_GE testing...
FD 3> running in slot 3 (83 tests)
Executing all diagnostic tests in slot 3
(total/indiv. timeout set to 600/200 sec.)
Field Diagnostic: ****TEST FAILURE**** slot 3: last test run 51,
Fabric Packet Loopback, error 3
Shutting down diags in slot 3
slot 3 done, will not reload automatically
The line card reloads automatically only after it passes the test. In the example above, the line card failed the test and
thus did not reload automatically. You can manually reload the line card with the hw-module slot <slot> reload
command.
When you use the verbose keyword, the output includes each individual test that is performed, and whether or not
each test has passed or failed. Here is a sample output:
Router#diag 3 verbose
Running DIAG config check
Running Diags will halt ALL activity on the requested slot.
[confirm]
Router#
Launching a Field Diagnostic for slot 3
Downloading diagnostic tests to slot 3 (timeout set to 600 sec.)
Field Diag download COMPLETE for slot 3
FD 3> *****************************************************
FD 3> GSR Field Diagnostics V4.0
FD 3> Compiled by award on Thu May 18 13:43:04 PDT 2000
FD 3> view: award-conn_isp.FieldDiagRelease
FD 3> *****************************************************
FD 3> BFR_CARD_TYPE_1P_GE testing...
FD 3> running in slot 3 (83 tests)
Executing all diagnostic tests in slot 3
(total/indiv. timeout set to 600/200 sec.)
FD 3> Verbosity now (0x00000001) TESTSDISP
FDIAG_STAT_IN_PROGRESS(3): test #1 R5K Internal Cache
FDIAG_STAT_IN_PROGRESS(3): test #2 Burst Operations
FDIAG_STAT_IN_PROGRESS(3): test #3 Subblock Ordering
http://kbase/paws/servlet/ViewFile/15926/hwts_gsrlc_15926.xml?convertPaths=1[8/6/2010 3:56:13 PM]