Cisco 12000 - Series Chassis Modular Expansion Base Manuel de dépannage du matériel - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de dépannage du matériel pour {nom_de_la_catégorie} Cisco 12000 - Series Chassis Modular Expansion Base. Cisco 12000 - Series Chassis Modular Expansion Base 18 pages. Internet router line card failures
Également pour Cisco 12000 - Series Chassis Modular Expansion Base : Fiche technique (9 pages), Manuel de synthèse (6 pages), Manuel d'instructions de remplacement (40 pages)
Imprimer la page
Cisco - Hardware Troubleshooting for Cisco 12000 Series Internet Router Line Card Failures
If you feel that the problem is related to a hardware fault, this document can help you identify the cause of the failure.
Components Used
The information in this document is based on these software and hardware versions:
All Cisco 12000 Series Internet Routers, including the 12008, 12012, 12016, 12404, 12406, 12410, and the
12416.
®
All Cisco IOS
The information in this document was created from the devices in a specific lab environment. All of the devices used
in this document started with a cleared (default) configuration. If your network is live, make sure that you understand
the potential impact of any command.
Hardware-Software Compatibility and Memory Requirements
Whenever you install a new line card, module, or Cisco IOS software image, it is important to verify whether the
router has enough memory, and that the hardware and software are compatible with the features you want to use.
Complete these recommended steps to check for hardware-software compatibility and memory requirements:
1. Use the
Software Advisor
Tip:
The
Software Support for Features
software image needed by choosing the types of features you wish to implement.
2. Use the
Download Software Area
Flash) required by the Cisco IOS software, and/or download the Cisco IOS software image. To determine the
amount of memory (RAM and Flash) installed on your router, see
- Memory
Requirements.
Tips:
If you want to keep the same features as the version that is currently running on your router, but do not
know which feature set you use, enter the show version command on your Cisco device, and paste its
output in the Output Interpreter Tool. You can use
potential issues and fixes. To use
customer, be logged in, and have JavaScript enabled. It is important to check for feature support,
especially if you plan to use recent software features.
If you need to upgrade the Cisco IOS software image to a new version or feature set, refer to
Choose a Cisco IOS Software Release
3. If you determine that a Cisco IOS software upgrade is required, follow the
Procedure
for the Cisco 12000 Series Router.
Tip: For information on how to recover a Cisco 12000 series router stuck in ROMmon (rommon # > prompt),
see
ROMmon Recovery Procedure for the Cisco
Conventions
http://kbase/paws/servlet/ViewFile/15926/hwts_gsrlc_15926.xml?convertPaths=1[8/6/2010 3:56:13 PM]
software versions that support the Cisco 12000 Series Internet Router.
(
registered
customers only
(
registered
Output Interpreter
) tool to choose software for your network device.
(
) section helps you determine the Cisco IOS
registered
customers only
) to check the minimum amount of memory (RAM and
customers only
Output Interpreter
(
registered
for more information.
12000.
How to Choose a Cisco IOS Software Release
(
registered
customers only
) , you must be a
customers only
Software Installation and Upgrade
) to display
registered
How to