Cisco 12816 Manuel d'instructions de remplacement - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de remplacement pour {nom_de_la_catégorie} Cisco 12816. Cisco 12816 18 pages. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Également pour Cisco 12816 : Instructions de déballage Manuel (28 pages), Fiche technique (9 pages), Manuel d'instructions (16 pages), Manuel d'instructions de remplacement (32 pages)

Removing and Replacing the Blower Modules

Install the new blower module into the chassis

Step 2

Lift the blower module (with two hands) and slide it halfway into the module bay.

Slowly push the blower module into the chassis until it mates with the backplane connector at the

back of the module bay.

Caution

To prevent damage to the connectors, do not use excessive force when inserting the blower module into

the chassis.

Tighten the captive screws on the blower module to secure it to the chassis.

•

The (green) OK status indicator on the front of the blower module should light. If the OK indicator

does not light, see the

Figure 3

Cisco 12016, Cisco 12416, and Cisco 12816 Router Blower Module and Air Filter Replacement Instructions

"Troubleshooting the Installation" section on page

Installing the Upper Blower Module

PWR OK

FAULT

PWR OK

FAULT

TEMP

I LIM

(Figure

3):

PWR OK

FAULT

TEMP

I LIM

78-16083-02