ActronAir RC-01 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ActronAir RC-01. ActronAir RC-01 12 pages. Suitable for models: cre-071as, cre-100as, cre-125as, cre-140as, wre-026as, wre-035as, wre-050as, wre-071as, wre-080as, mre-035as, mre-050as

Imprimer la page

4. System Operation

Auto Operation

COOL

Cooling / Heating / Fan Operation

COOL

Dehumidifying Operation (Dry Mode)

COOL

TEMP.

Remote Control

1. Press the MODE button to select Auto.

2. Press the UP/DOWN button to set the desired

temperature. The temperature can be set within a

range of 17°C~ 30°C in 1°C increments.

3. Press the ON/OFF button to start the air conditioner.

NOTE

1. In the Auto mode, the air conditioner can logically

choose the mode of Cooling, Fan, and Heating by

sensing the difference between the actual ambient

room temperature and the setting temperature on

the remote controller.

2. In the Auto mode, you can not adjust the fan speed.

It has already been automatically controlled.

3. If the Auto mode is not comfortable for you, the

desired mode can be selected manually.

1. Press the MODE button to select COOL, HEAT or FAN

mode.

2. Press the UP/DOWN buttons to set the desired

temperature. The temperature can be set within a

range of 17°C~ 30°C in 1°C increments.

3. Press the FAN button to select the fan speed in four

steps - Auto, Low, Med or High.

4. Press the ON/OFF button to start the air conditioner.

NOTE

In the FAN mode, the room temperature is not controlled

and the set temperature will not be displayed on the

remote controller. In this case, only step 1, 3 and 4 may

be performed.

1. Press the MODE button to select DRY mode.

2. Press the UP/DOWN buttons to set the desired

temperature. The temperature can be set within a

range of 17°C~ 30°C in 1°C increments.

3. Press the ON/OFF button to start the air conditioner.

NOTE

In the Dehumidifying (dry mode), you can not adjust the

fan speed, as it will be automatically controlled.

Page 8