ActronAir SWB52E Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ActronAir SWB52E. ActronAir SWB52E 8 pages.

Imprimer la page

Dehumidifying operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on t he
display panel of the indoor un it starts flashing.
1. Press the
2. Press the
desired temperature.
ca n be set with in a range of 17 C~ 30 C
3. Press the
co nditione r.
ON/OFF
NOTE
3
2
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically controlled.
MODE
SHORTCUT
1
FAN
TEMP
SWING
SPEED
TIMER
TIMER
SWING

Adjusting air flow direction

ON
OFF
Use the SWING
TURBO
LED
SLEEP
SELF CLEAN
FOLLOWME
the desired airflow direction.
1. When the SWING
RES ET
LOCK
louvre changes 6º degrees in angle for each push. I f
you the SWING button for more than 2 seconds, the
louvre will automatically swing up and down.
2. When the SWING
louvre changes 6º degrees in angle for each push. I f
you the SWING button for more than 2 seconds, the
louvre will automatically swing left and right.
NOTE:
MODE
button to select DRY m ode .
UP/DOWN
buttons to set the
The t emperature
O
in 1 C inc rements.
O
ON/OFF
button to start th e air
and SWING
buttons to adjust
button is selected, the horizontal
button is selected, the vertical
If the horizontal/vertical louvre swing
Is moved to a position which would affect
the cooling or heating of the air conditioner,
the unit will automatically change the swing
direction.
O
ON/OFF
MODE
TEMP
SWING
TIMER
SWING
ON
TURBO
SLEEP
SELF CLEAN
RESET

Timer operation

Press the TIMER ON button to set the auto-on
time of the unit. Press the TIMER OFF button
to set the auto-off time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
1
the time increases by half an hour between 0
SHORTCUT
and 10 hours and by one hour between 10 and
24 hours.
FAN
SPEED
3. After setting the TIMER ON ,there will be a one
second delay before the remote controller
TIMER
OFF
2
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
LED
FOLLOWME
signal "H" will disappear and the set temperature
will re-appear on the LCD display window.
LO CK
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set
desired Auto-off time. Each time you press the
button, the time increases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER OFF, there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "H" will disappear and the set temperature
will re-appear on the LCD display window.