ActronAir SWB82E Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ActronAir SWB82E. ActronAir SWB82E 8 pages.

Imprimer la page

Remote Controller Specifications

Model
RG35D // BG(C)EF
3.0V(Dry batteries 1.5V AAA x 2)
Rated Voltage
Signal Receiving
8m (when using 3.0 voltage, it gets 11m)
Range
Environment
-5ºC 60ºC
Performance Feature
1. Operating Mode: AUTO, COOL, DRY, HEAT, and FAN.
2. Timer Setting Function in 24 hours.
3. Indo
4. Full function of LCD (Liquid Crystal Display).

Function buttons

1
2
3
ON/OFF
1
8
MODE
SHORTCUT
2
9
4
FAN
SWING
TEMP
SPEED
10
3
TIMER
TIMER
SWING
OF F
ON
11
4
T URBO
LED
SL EE P
SE LF CLE AN
FOLLOW ME
12
5
RE SET
LOCK
6
13
7
14
5
ON/OFF Button
Operation starts when this button is pressed
and stops when this button is pressed again.
MODE Button
Each time the button is pressed, the operation
mode is selected in a sequence of following:
AUTO
COOL
DRY
HEAT
SWING
Button
Used to stop or start horizontal louvre move-
ment or set the desired up/down air flow
direction. The louvre changes 6º degrees in
angle for each press. When pressed for more
than 2 seconds, the louvre will swing up and
down automatically.
SWING
Button
Used to stop or start vertical louvre movement
and set the desired left/right air flow direction.
The vertical louvre changes 6 degree in angle
,
for each press. And the temperature display
area of indoor unit displays
for one
second. When pressed for more than 2 seconds,
the vertical louvre swing feature is activated.
,
And the display area of indoor unit displays
IIII
, flashes four times, then the temperature
,
setting reverts back. If the vertical louvre swing
feature is stopped, it displays LC and remains
on for 3 seconds.
SLEEP Button
Active/Disable SLEEP function.The sleep
function enables the unit to automatically
increase(cooling) or decrease(heating)
1 C per hour for the first two hours, then hold
O
steady for the next 5 hours, after that the unit
will stop operation. This function is only available
under Cooling, Heating and AUTO operations.
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if press the MODE,
FAN SPEED or ON/OFF button.
FAN