Cisco 2504 Manuel de démarrage - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco 2504. Cisco 2504 47 pages. Wireless controller
Également pour Cisco 2504 : Manuel de l'utilisateur (11 pages)

Imprimer la page

Installing the Controller

Figure 6

After the controller is mounted on the wall, perform the following tasks to complete the installation:

Step 3

•

For configuration instructions about using the CLI setup program, see the

Step 4

and Power-On Self Test" section on page

Mounting the Controller on a Wall (Mounting Screws)

When mounting the 2504 controller on a wall using mounting screws, always mount the controller with

the front panel facing down.

Warning

Read the wall-mounting carefully before beginning installation. Failure to use the correct hardware

or to follow the correct procedures could result in a hazardous situation to people and damage to the

system. Statement 378

To mount the controller on a wall using mounting screws, follow these steps:

Mark the location of the mounting screws on the wall. Use the mount hole locations on the back of the

Step 1

controller for placement of the mounting screws

a cross-hatch mark.)

Cisco 2500 Series Wireless Controller Getting Started Guide

Mounting the Controller on the Wall

Front panel (facing down)

#10-32 flat head screws

Connecting the Controller Console Port

Securing the Power Adapter Cable

Connecting to the Network

Wall mounting screws

20.

(Figure

7). (The mount holes are shown in

"Running the Bootup Script

Figure 7

with