Cisco 2504 Manuel de démarrage - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco 2504. Cisco 2504 47 pages. Wireless controller
Également pour Cisco 2504 : Manuel de l'utilisateur (11 pages)

Imprimer la page

Installing the Controller

Figure 10

#10-32 pan-head screws or #12-24 slotted head screws

After the controller is mounted in the rack, perform the following tasks to complete the installation:

Step 3

•

Step 4

For configuration instructions about using the CLI setup program, see the

and Power-On Self Test" section on page

Connecting the Controller Console Port

Do not connect a Power over Ethernet (PoE) cable to the console port. Doing so will damage the

Caution

controller.

Before you can configure the 2504 controller for basic operations, you need to connect it to a PC that

uses a VT-100 terminal emulator (such as HyperTerminal, ProComm, Minicom, or Tip). To connect the

PC to the controller console port, follow these steps:

Plug the RJ-45 connector on a null-modem serial cable into the controller console port and the other end

Step 1

of the cable into the serial port of the PC.

Cisco 2500 Series Wireless Controller Getting Started Guide

Mounting the Controller in a 19-Inch Rack

Connecting the Controller Console Port

Securing the Power Adapter Cable

Connecting to the Network

20.

"Running the Bootup Script