Epson EMP-715 - XGA LCD Projector Informations sur le produit - Page 9

Parcourez en ligne ou téléchargez le pdf Informations sur le produit pour {nom_de_la_catégorie} Epson EMP-715 - XGA LCD Projector. Epson EMP-715 - XGA LCD Projector 13 pages. Epson powerlite 505c: product information
Également pour Epson EMP-715 - XGA LCD Projector : Spécifications (3 pages)

Imprimer la page

Cleaning the Lens

Warning: Before you clean any part of the projector, turn off the

projector and unplug the power cord. Never open any cover on the

projector, except the lamp and filter covers. Dangerous electrical

voltages in the projector can injure you severely. Do not try to

service this product yourself, except as specifically explained in this

Product Information Guide. Refer all other servicing to

qualified service personnel.

Clean the lens whenever you notice dirt or dust on the surface.

Use a canister of compressed air to remove dust. To remove

dirt or smears on the lens, use lens-cleaning paper. If

necessary, moisten a soft cloth with lens cleaner and gently

wipe the lens surface.

Cleaning the Projector

To clean the projector, first unplug the power cord. To

remove dirt or dust, wipe the projector with a soft, dry, lint-

free cloth. To remove stubborn dirt or stains, moisten a soft

cloth with water and a neutral detergent. Then wipe the

projector.

Do not use wax, alcohol, benzene, thinner, or other chemical

detergents. These can cause the projector's plastic case to

warp.

Cleaning the Air Filter

Clean the air filter after every 100 hours of use, or if the

temperature warning light on top of the projector turns

red.

If the filter is not cleaned periodically, it can become clogged

with dust, preventing proper ventilation. This can cause

overheating and damage the projector. Follow these steps to

clean the filter:

1. Turn off the projector and unplug the power cord.

2. Stand the projector on end to keep dust and dirt from falling

inside.

EPSON PowerLite 505c/715c Projector

3. To clean the filter, EPSON recommends using a small

vacuum cleaner designed for computers and other office

equipment. If you don't have one, gently clean the filter

using a very soft brush (such as an artist's camel-hair brush).

If the dirt is difficult to remove or if the filter is torn, replace

it. Contact your dealer or call EPSON at (800) 873-7766 in

the United States and Canada to obtain a new one.

Note: When you get a replacement lamp for your projector, a

new air filter is included. You should replace the filter when

you replace the lamp.

4. If you need to replace the filter, use a small screwdriver to

pry it off.

5. To install the new filter, first insert the tab, then press down

until it clicks in place.

1/01

EPSON PowerLite 505c/715c Projector

- 9