ActronAir CP05 Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ActronAir CP05. ActronAir CP05 16 pages. Control interface

CP05 & CP10 CONTROL INTERFACE INSTALLATION GUIDE

CONTROL INTERFACE (CP05) MOUNTING DETAILS:

Dimensions:

76mm

CONTROL INTERFACE (CP05) DE-MOUNTING PROCEDURE:

Panel Thickness: T = 1.2 - 6.0mm

CONTROL INTERFACE (CP05) REMOTE MOUNTING PROCEDURES:

Step 1: Prepare a panel for mounting the Control Interface with cut-out dimensions as shown above.

NOTE: Use a Blank Cover-Plate to mount the Control Interface into a wall.

Cut-out Mounting Hole

(29mm H x 71mm W)

Step 2: Insert the Control Interface into panel cut-out, as shown:

Panel

Mounting Cut-out

(29mm H x 71mm W)

Control Interface

ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject to change without notice.

34.4mm

38.4mm

Step 1

Press-on the

Lateral Sliding

Plastic Brackets'

mid section

Insert Control Interface

unto Panel Cut-out

Panel

Control Interface Mounting Cut-Out Details:

Step 2

Pull-out the Lateral Sliding

Plastic Brackets from the

Panel

Step 3

Remove CP05

Control Interface

Back Piece-

Control Interface

BlankCover- Plate

(Installer to Provide)

71mm

Control Interface

2 x Lateral Sliding

Plastic Brackets

(1 each side)