Epson EMP-811 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Epson EMP-811. Epson EMP-811 36 pages. Esc/vp21 command user's guide for business projectors
Également pour Epson EMP-811 : Brochure & Specs (24 pages), Manuel de l'utilisateur (24 pages), Spécifications (1 pages), Manuel de référence rapide (17 pages), Manuel de l'utilisateur (25 pages), Spécifications (2 pages), Manuel de l'utilisateur (25 pages), Manuel de l'utilisateur (28 pages), Manuel de l'utilisateur (28 pages)

Operating environment

Limitations imposed by a Windows Vista

environment

When using EMP Monitor under Windows Vista, note the following

limitations.

• You must have administrator authority in order to use "Register at

startup" on the "Environment setup" screen of EMP monitor.

s"Monitoring using the system tray"

• Even after EMP monitor has been uninstalled, the settings and log

information will remain on the hard disk. If this information is no longer

required, you may delete the "EMP Monitor V4.22" folder. Provided the

default settings were used at installation, this folder can be found at:

"C:\Users\(User Name)\AppData\Local\VirtualStore\Program

Files\EPSON Projector\EMP Monitor V4.22"

Check the following points before starting up EMP Monitor.

• EMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000, Windows NT4.0, Windows XP, or Windows

Vista, the computer must be started up in Administrator mode.

• For some projectors, a commercially-available serial ⇔ TCP/IP

conversion adapter and a connection cable are required in order to use

EMP Monitor.

• If you are using a serial ⇔ TCP/IP conversion adapter, make the settings

for the adapter before connecting to the projector.

p.22