Cisco 2651 Manuel de l'utilisateur - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco 2651. Cisco 2651 48 pages. Non-proprietary security policy

Imprimer la page

The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers

Place the seventh label on the router as shown in

Step 8

so that one half of the label covers the enclosure and the other half covers the Compact Flash slot. Any

attempt to remove a CF card will leave tamper evidence.

Step 9

The labels completely cure within five minutes.

Figure 22

NM -HD

BA NK 4

BA NK 3

BA NK 2

To apply tamper-evidence labels to the Cisco 3725:

Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based

Step 1

cleaning pads are recommended for this purpose. The temperature of the router should be above 10°C.

Step 2

Place the first label on the router as shown in

that the one half of the tamper evidence label covers the enclosure and the other half covers the right side

of the router. Any attempt to remove the enclosure will leave tamper evidence.

Step 3

Place the second label on the router as shown in

so that the one half of the tamper evidence label covers the enclosure and the other half covers the left

side of the router. Any attempt to remove the enclosure will leave tamper evidence.

Place the third label on the router as shown in

Step 4

that the one half of the label covers the enclosure and the other half covers the top double-sized Network

Module slot. Any attempt to remove a network module will leave tamper evidence.

Place the fourth label on the router as shown in

Step 5

so that the half of the label covers the enclosure and the other half covers the bottom Network Module

slot. Any attempt to remove a network module will leave tamper evidence.

Place the fifth label on the router as shown in

Step 6

that one half of the label covers the enclosure and the other half covers the left WAN interface card slot.

Any attempt to remove a WAN interface card will leave tamper evidence.

Place the sixth label on the router as shown in

Step 7

that one half of the label covers the enclosure and the other half covers the middle WAN interface card

slot. Any attempt to remove a WAN interface card will leave tamper evidence.

Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary

Tamper Evidence Label Placement

BA NK 1

BA NK 0

SEE MAN

UAL BEF

ORE INST

DSU

ALLA TION

56K

SEE MAN

UAL BEF

ORE INST

ALLA TION

Figure

22. The tamper evidence label should be placed

DSU

56K

SEE MAN

UAL BEF

ORE INST

ALLA TION

SE RI ES

Figure

23. The tamper evidence label should be placed so

Figure

23. The tamper evidence label should be placed

Figure

23. The tamper evidence label should be placed so

Figure

23. The tamper evidence label should be placed

Figure

23. The tamper evidence label should be placed so

Figure

23. The tamper evidence label should be placed so

OL-6083-01