Cisco 2654T6 Manuel de reconditionnement - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de reconditionnement pour {nom_de_la_catégorie} Cisco 2654T6. Cisco 2654T6 26 pages. Cisco systems router owner's manual

Imprimer la page

Repackaging the Routers

Shift the pallet to ensure that it is positioned evenly all the way around the

Step 8

scissor-jack platform and the bolt holes in the hold-down brackets on the sides of

the scissor-jack platform are aligned with the holes in the top of the shipping

pallet.

Turn the scissor-jack screw slowly clockwise to close the scissor-jack platform

Step 9

and lower the top of the scissor-jack platform slowly until the hold-down brackets

touch the top of the shipping pallet.

Set a blocking plate into the hold-down bracket so that the blank side of the

Step 10

blocking plate is against the heads of the bolts in the side of the scissor-jack

platform and the open holes in the blocking plate align with the bolt holes in the

top of the pallet.

Insert bolts through each of the hold-down bracket holes and into the holes in the

Step 11

top of the shipping pallet, then use the 9/16-inch (14-mm) wrench to tighten the

bolts.

Turn the scissor-jack screw slowly clockwise to collapse the scissor-jack platform

Step 12

and raise the base of the scissor-jack platform until the weight of the router and

scissor-jack platform is absorbed by the pallet. Continue turning the scissor-jack

screw clockwise to close the scissor-jack platform and lift the base of the

scissor-jack platform until the scissor-jack platform is completely closed (the

screw can not be turned).

Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide

A-18

Appendix A

Repackaging the Router

OL-17440-01