Cisco 2654T6 Manuel de reconditionnement - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de reconditionnement pour {nom_de_la_catégorie} Cisco 2654T6. Cisco 2654T6 26 pages. Cisco systems router owner's manual

Imprimer la page

Appendix A

Repackaging the Router

Completing the Repackaging

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

OL-17440-01

To repackage the router, use

these steps:

Verify that the anchor clips fastening the chassis to the scissor-jack platform are

installed correctly and that the bolts are tight.

Verify that the bolts fastening the hold-down brackets to the sides of the

scissor-jack platform and the top of the pallet are tight.

Pull the plastic bag over the router to protect it against electrostatic discharge

(ESD) and dust.

Place the side of the accessories package with the single box containing the

center-mount rack-mounting brackets against the back panel of the router on the

extended deck of the pallet body.

Place the folded corrugated spacer on top of the accessories package, then place

the two foam inserts around the top of the router.

To install the U-shaped, corrugated side panels, use

reference and follow these steps:

Set the long side of one panel on the pallet base such that it sits inside the

bead-boards attached to the outside corners of the pallet riser blocks and

against the side of the pallet platform.

Set the narrow end flaps of the panel inside the bead-boards attached to the

outside corners of the pallet riser blocks.

Position the opposite U-shaped side panel such that one narrow end flap is

inside the narrow end flap of the first U-shaped side panel, while the other

narrow end flap is outside the narrow end flap of the first U-shaped side panel.

Because the two U-shaped side panels are identical, interlocking them in

Note

this fashion maintains the correct overall container dimensions and

strength.

Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide

Figure A-1 on page A-4

Repackaging the Routers

as a reference and follow

Figure A-1 on page A-4

as a

A-23