Cisco 2691 Series Manuel de démarrage rapide - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 2691 Series. Cisco 2691 Series 29 pages. Modular routers
Également pour Cisco 2691 Series : Installation et formatage (34 pages), Fiche technique (8 pages), Manuel de l'utilisateur (48 pages)
Imprimer la page
• A WIC in each WIC slot (containing interfaces Serial 0/0 and Serial 0/1 in physical slot W0, interface Serial 0/2 in physical
slot W1, and interface BRI 0/0 in physical slot W2)
If physical slot W0 is empty and physical slot W1 contains a 1-port serial WIC, the interface number in the WIC is
–
numbered Serial 0/0.
If slot W0 contains a 2-port serial WIC and slot W1 contains a 1-port serial WIC, the interfaces in physical slot W0 are
–
numbered Serial 0/0 and Serial 0/1, and the interface in physical slot W1 is numbered Serial 0/2.
If slot W0 contains a 2-port serial WIC and slot W1 contains a 1-port BRI WIC, the interfaces in physical slot W0 are
–
numbered Serial 0/0 and Serial 0/1, and the interface in physical slot W1 is numbered BRI 0/0.
The slot number for all WIC interfaces is always 0. (The W0 and W1 slot designations are for physical slot
Note
identification only.) Interfaces in the WICs are numbered from right to left, starting with 0/0 for each interface type,
regardless of which physical slot the WICs are installed in.
Figure 10
Interface Numbering in Cisco 2691 Routers
NM -H DV
BA NK 4
BA NK 3
BA NK 2
BA NK 1
BA NK 0
V0
EN
T1 1/1
T1 1/0
FastEthernet 0/1
Voice Interface Numbering
Voice interfaces are numbered as follows:
chassis-slot/voice-module-slot/voice-interface
If a 4-channel voice network module is installed in chassis slot 1, the voice interfaces are:
• 1/0/0—Chassis slot 1/Voice module slot 0/Voice interface 0
• 1/0/1—Chassis slot 1/Voice module slot 0/Voice interface 1
• 1/1/0—Chassis slot 1/Voice module slot 1/Voice interface 0
• 1/1/1—Chassis slot 1/Voice module slot 1/Voice interface 1
8
Where to Go Next
For additional detailed configuration procedures, refer to the appropriate Cisco 2691 documentation or Cisco IOS software
documentation, available online on Cisco.com:
See the "Obtaining Documentation" section on page 24 for help in locating these documents.
Tip
SEE MAN
UAL BEF
DS U
ORE INS
TAL LAT ION
56K
SEE MAN
UAL BEF
DS U
ORE INS
TAL LAT ION
56K
SEE MAN
UAL BEF
ORE INS
TAL LAT ION
BRI 0/0
Serial 0/2
Compact Flash slot
FastEthernet 0/0
Serial 0/1
Serial 0/0
23