Cisco 2800 Series Manuel de démarrage rapide - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 2800 Series. Cisco 2800 Series 45 pages. Cisco ios software configuration
Également pour Cisco 2800 Series : Manuel de démarrage rapide (13 pages), Fiche technique (8 pages), Manuel de démarrage rapide (47 pages), Note d'application (41 pages), Configuration (10 pages), Vue d'ensemble (27 pages), Fiche technique (5 pages), Fiche technique (20 pages), Configuration (32 pages)

You can mount the router in the following ways:

• Center mounting—Brackets attached in the center of the chassis with only the front panel facing forward

• Front mounting—Brackets attached at the front of the chassis with the front panel facing forward

• Rear mounting—Brackets attached at the rear of the chassis with the rear panel facing forward

The brackets are shown in Figure 4, Figure 5, and Figure 6.

Figure 4

Brackets for Rack-Mounting of Cisco 2801 Routers

Figure 5

Brackets for Rack-Mounting of Cisco 2811 Routers

Bracket pair for 19-inch rack

Figure 6

Brackets for Rack-Mounting of Cisco 2821 and Cisco 2851 Routers

Bracket pair for 19-inch rack

Attaching Brackets to the Router for Rack-Mounting

Attach the mounting brackets to the router chassis as shown in Figure 7 through Figure 9, using the screws provided.

Caution

Do not overtorque the screws. The recommended torque is 15–18 in-lb (1.7–2.0 N-m).

Attach the second bracket to the opposite side of the chassis. Use a number 2 Phillips screwdriver to install the bracket screws.

Caution

Your chassis installation must allow unrestricted airflow for chassis cooling.

Bracket pair for 23-inch rack