Cisco 2800 Series Configuration - Page 27

Parcourez en ligne ou téléchargez le pdf Configuration pour {nom_de_la_catégorie} Cisco 2800 Series. Cisco 2800 Series 32 pages. Cisco ios software configuration
Également pour Cisco 2800 Series : Manuel de démarrage rapide (13 pages), Fiche technique (8 pages), Manuel de démarrage rapide (47 pages), Note d'application (41 pages), Manuel de démarrage rapide (45 pages), Configuration (10 pages), Vue d'ensemble (27 pages), Fiche technique (5 pages), Fiche technique (20 pages)

Configuring Radio Settings on an Access Point

DETAILED STEPS

Command or Action

Step 1

enable

Example:

Router> enable

Step 2

configure terminal

Example:

Router# configure terminal

Step 3

dot11 phone

Example:

Router(config)# dot11 phone

Step 4

end

Example:

Router(config-if)# end

Step 5

copy running-config startup-config

Example:

Router# copy running-config startup-config

Configuration Examples for Radio Settings on an Access Point

This section contains the following examples:

•

Configuring Radio Data Rates: Example

The following example shows how to disable the 1-Mbps data rate and set the rest of the data rates to

basic:

configure terminal

interface dot11radio 0

no speed basic-2.0 basic-5.5 basic-11.0

end

copy running-config startup-config

Configuring Radio Data Rates: Example

Configuration Examples for Radio Settings on an Access Point

Purpose

Enables privileged EXEC mode.

Enter your password if prompted.

•

Enters global configuration mode.

Enables IEEE 802.11 compliance phone support.

Returns to privileged EXEC mode.

(Optional) Saves your entries in the configuration file.