Cisco 2821 Series Fiche technique - Page 6

Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Cisco 2821 Series. Cisco 2821 Series 20 pages. 2800 series integrated services routers
Également pour Cisco 2821 Series : Installation et mise à niveau (21 pages), Opérations (31 pages), Opérations (31 pages), Manuel de démarrage rapide (47 pages)

Imprimer la page

Feature

Dynamic Multipoint VPN

(DMVPN)

URL filtering

Cisco Router and Security

Device Manager (SDM)

IP Telephony Support—Features and Benefits

The Cisco 2800 Series allows network managers to provide scalable analog and digital telephony without investing in a one-time solution

(refer to Table 4 for more detail), allowing enterprises greater control of their converged telephony needs. Using the voice and fax modules,

the Cisco 2800 Series can be deployed for applications ranging from voice-over-IP (VoIP) and voice-over-Frame Relay (VoFR) transport to

robust, centralized solutions using the Cisco Survivable Remote Site Telephony (SRST) solution or distributed call processing using Cisco

Call Manager Express (CME). The architecture is highly scalable with the ability to support up to 12 T1/E1s trunks, 52 foreign-exchange-

station (FXS) ports, or 36 foreign-exchange-office (FXO) ports concurrent with data routing and other services.

Table 4.

IP Telephony Support—Features and Benefits

Feature

Benefit

IP phone support

EVM module slots

PVDM (DSP) slots on

motherboard

Integrated call processing

Integrated voice mail

Broad range of voice

interfaces

Support of Survivable

Remote Site Telephony

(SRST) Feature

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Benefit

DMVPN is a Cisco IOS Software solution for building IPsec + generic routing encapsulation (GRE) VPNs

in an easy and scalable manner.

URL filtering is available onboard with an optional content-engine network module or external with a PC

server running the URL filtering software.

This intuitive, easy-to-use, Web-based device-management tool is embedded within the Cisco IOS Software

access routers; it can be accessed remotely for faster and easier deployment of Cisco routers for both WAN

access and security features.

Optional support for Cisco in-line power distribution to Ethernet switch network modules and HWICs can

be used to power Cisco IP phones.

Extension Voice Module Slots, available only on the Cisco 2821 and Cisco 2851, provide support for the

Cisco High-Density Analog and Digital Extension Module for Voice and Fax, providing support for up to

24 total voice and fax sessions without consuming a Network Module Slot.

DSP (PVDM2) modules deliver support for analog and digital voice, conferencing, transcoding, and secure

Real-Time Transport Protocol (RTP) applications.

Cisco CME is an optional solution embedded in Cisco IOS Software that provides call processing for Cisco

IP phones. Cisco CME delivers telephony features similar to those that are commonly used by business users

to meet the requirements of the small to medium-sized offices.

Support for up to a 100 mailboxes using the Cisco Unity

the integration of an optional voice-mail AIM or network module.

Interfaces for local telephone, private branch exchange (PBX), and gateway connections include FXS; FXO;

direct inward dialing (DID); ear and mouth (E&M); Centralized Automated Message Accounting (CAMA);

ISDN Basic Rate Interface (BRI); and T1, E1, and J1 with ISDN Primary Rate Interface (PRI); QSIG; and

several additional channel-associated-signaling (CAS) signaling schemes.

Branch offices can take advantage of centralized call control while cost-effectively providing local branch

backup using SRST redundancy for IP telephony.

Express voice messaging system is possible with

Page 6 of 19