Command
reset radius statistics
reset recycle-bin
reset saved-configuration
reset stop-accounting-buffer
reset stp
reset tcp statistics
reset trapbuffer
reset udp statistics
rmdir
save
schedule reboot at
schedule reboot delay
send
startup bootrom-access
enable
startup saved-configuration
system-view
telnet
terminal debugging
terminal logging
terminal monitor
terminal trapping
tftp get
tftp put
undelete
undo
xmodem
Table 4 System View
<4500>sys
Command
acl number
am enable
am trap enable
arp check enable
arp static
arp timer aging
change unit-id
change self-unit
command-privilege level
copy configuration
cut connection
Description
Clear the statistic information related to the RADIUS protocol
Delete contents of recycle bin
Delete configuration files
Delete the stopping accounting requests from the buffer
according to the specified RADIUS server name
Clear statistics for STP
Clear TCP statistics information
Reset information in trap buffer
Clear UDP statistics information
Delete an existing directory
Save current configuration
Schedule a reboot of the Switch at specified time
Configure the Switch to be rebooted after a specified time
delay
Send information to other user terminal interface
Enable BOOTROM access
Configure the configuration file used for starting the system
Enter the system view (See
Table 4, "System View," on
page
7)
Establish one Telnet connection
Configure to display the debugging information on the
terminal
Enable terminal log information display
Enable the log debugging/log/trap on the terminal monitor
Enable terminal trap information display
Download a file from the specified directory of the TFTP
server
Upload a file from the Switch to the specified directory on the
TFTP server
Recover a deleted file
Cancel the current setting
Establish an xmodem connnection
Description
Define ACL identified by a number or a name, and then enter
the corresponding ACL view (See
page
17)
Enable the access management function
Enable the access management trap
Enable the checking of ARP entries
Configure the static ARP mapping entries in an ARP mapping
table
Configure the dynamic ARP aging timer
Change the ID of the Switch
Change the ID of the Switch
Specify the command level
Copy source port configuration to destination port
Disconnect a user or a category of users by force
7
Table , "[4500]rip ," on
Web Command
Administration -> Initialize
Save Configuration
Administration -> Restore
Configuration
Administration -> Restore
Configuration
Administration -> Backup
Configuration
Web Command
Device -> ACL
Security-> Authorized IP
Imprimer la page