Epson EMP-TS10 Manuel de configuration - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Epson EMP-TS10. Epson EMP-TS10 22 pages. Home theatre projector
Également pour Epson EMP-TS10 : Manuel d'utilisation (36 pages), Spécifications (1 pages), Manuel de déballage et d'installation (2 pages)

Imprimer la page
Epson EMP-TS10 Manuel de configuration
Continued on
the back page
RGB video is only compatible with sync-in-green signals. This can be
checked by looking at "Sync. Mode" in the "About" menu.
After making the connections, change the "Comp1 Input" or "Comp2
/YCbCr Input" setting in the "Setting" menu to "RGB Video".
For separate sync (separate H-SYNC and V-SYNC) signals, set to
"Analog-RGB". ("Setting" menu in User's Guide )
This can be checked by looking at "Sync. Mode" in the "About" menu.
After making the connections, change the "Audio Input" setting in the
"Audio" menu to either "Audio1" or "Audio2", depending on which
input port you are using. The default setting is "Audio2".
For a RGB connection, a commercially available adapter or converter
cable might be required.