Cisco 3825 Series Installation et mise à niveau - Page 18

Parcourez en ligne ou téléchargez le pdf Installation et mise à niveau pour {nom_de_la_catégorie} Cisco 3825 Series. Cisco 3825 Series 20 pages. Integrated services routers
Également pour Cisco 3825 Series : Politique de sécurité non propriétaire (30 pages), Manuel de démarrage rapide (38 pages), Manuel de démarrage rapide (40 pages)

Obtaining Documentation, Obtaining Support, and Security Guidelines

Replacing the Router Cover

Follow these steps to replace the cover.

Before you begin, read the safety warnings as described in the

Note

on page

Place the router on a flat surface, with the front panel facing you.

Step 1

Place the cover on the base, with about 1 inch (25 mm) of clearance between the cover and the back

Step 2

panel.

Slide the cover back onto the base, making sure that the hook at the back edge of the cover, near the left

Step 3

side, fits underneath the card cage on the back panel of the router.

When replacing the cover, do not pinch the wires.

Caution

Reinstall the rack-mounting brackets, and then reinstall the router in the rack.

Step 4

Reconnect power and network interface cables.

Step 5

Power up the router, and verify that the alarms and warnings disappear.

Step 6

Obtaining Documentation, Obtaining Support, and Security

Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback,

security guidelines, and also recommended aliases and general Cisco documents, see the monthly

What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical

documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Installing and Upgrading Fans in the Cisco 3825 Series Routers

"Safety Warnings and Guidelines" section

78-18642-01B0