Samsung 21Z57 Manuel d'instructions du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions du propriétaire pour {nom_de_la_catégorie} Samsung 21Z57. Samsung 21Z57 8 pages. Samsung colour television owner's instructions

Imprimer la page
Channel - Memorizing the Channels
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the CH
and CH
through the channels.
This eliminates the need to change channels by entering the
channel digits. There are three steps for memorizing channels:
"Air/CATV", "Auto Program" and "Add/Delete".
 Air/CATV
Before your TV can begin
Auto Program
memorizing the available
Add/Delete
channels, you must specify
Air/CATV
the type of signal source
Name
that is connected to the TV
(i.e., an antenna or a cable
Move
system). Select "Air", "STD",
"HRC", or "IRC" by pressing the ◄ or ► button.
 Auto Program
All available channels are
automatically stored in
memory when channels are
selected by the direct tuning
Enter
function.
Press the ENTER button
at any time to interrupt the
memorization process.
 Add/Delete
You can add or delete
Auto Program
a channel to display the
Add/Delete
channels you want only.
Air/CATV
To use the "Add/Delete"
Name
function, first run Auto
Program.
Move
Select "Deleted" or "Added"
by pressing the ▲ or ▼ button.
Channel - Name
Use this feature to assign an
easy-to-remember label to any
buttons to scan
channel (i.e., "CBS", "ESPN",
"PBS2", "CNN1", etc.).
A label consists of four fields,
where each field is a letter
(A~Z), a number (0~9), a blank,
or -. When the INFO button is
pressed, the channel label will
Channel
appear next to the channel number.
►
: Deleted ►
➢
You cannot select "Name" in the AV mode.
: Air
: ----
Adjust
Skip
Auto Program
Air
7
Start
Return
Channel
►
Deleted
: Deleted
Added
:Air
: ----
Enter
Return
Channel
Auto Program
►
Add/Delete
: Deleted ►
Air/CATV
: Air
Name
: ----
A
Move
Adjust
Return
English - 4
Setup - Time
 Clock
Setting the clock is
Clock
necessary in order to use
On Timer
the various timer features of
Off Timer
the TV. Also, you can check
Sleep Timer
the time while watching the
On Timer Volume :
TV. (Just press the INFO
Move
button.)
 On Timer / Off Timer
You can set the On/Off timers so that the TV will switch on
or off automatically at the time you select.
➢
You must set the clock first.
 Sleep Timer
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
➢
Press the SLEEP button on the remote control
repeatedly until the appropriate time interval appears
(any of the preset values from "30 Min." to "180 Min.").
 On Timer Volume
The preferred volume can be set for when the timer
automatically turns on the TV.
☛
Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
"On" mode and prevents overheating or leakages, which
may occur if a TV is on for too long.
Time
12
: 00 am
-- : -- am Off
-- : -- am Off
:
Off
10
Adjust
Return