c3controls 900-SEA8I4OM Manuel d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} c3controls 900-SEA8I4OM. c3controls 900-SEA8I4OM 17 pages. Smart programmable relays
Imprimer la page10
SERIES 900 SMART PROGRAMMABLE RELAYS
FUNCTIONS
RUN MODE
To enter into RUN mode select the "RUN" option in the main menu and
press 'OK. '
If the CONTINUE option is selected then Program execution will proceed
and the RUN mode display screen will appear as shown.
If the RESET option is selected then all special function block parameters
are initialized and the RUN mode display screen will appear.
PROGRAM
CONTINUE
RUN
OK
RESET
PARAMETERS
UTILITIES
RUN MODE FUNCTIONS
During the RUN mode the user can enter the RUN Mode Functions by
pressing the ESC key.
I 12345678
PAUSE
ESC
SA
STOP
Q 1234 08:30
PAR RUN
ESC
PROG RUN
Z3
PAUSE
STOP
PAR RUN
PROG RUN
Z3
PAUSE
STOP
PAR RUN
PROG RUN
Z3
PAUSE
STOP
PAR RUN
PROG RUN
PAUSE
If the PAUSE option is selected by pressing OK then program execution is
paused, and user has two options:
CONTINUE: Run with the parameters status it has or
RESET:
Reset the parameters and run the program.
STOP
If the STOP option is selected by then the program execution is stopped
and Main Menu is displayed on the screen.
PAR RUN
If the PAR RUN option is selected then Parameter edit window of Special
Function Block is displayed. The user can edit the parameters by using ALT,
UP, DOWN, and OK keys.*
PROG RUN
If the PROG RUN option is selected then the ladder program is displayed
on the screen. The user cannot edit the program and can only go through
the program by using UP and Down keys.
If Z-Keys are used in the program then pressing the ALT key will display the
Z-Key screen.
PAUSE
I 1 ----------[Q1
OK
STOP
I 2 ----------[Q2
PAR RUN
I 3 ----------[Q3
PROG RUN
*
Embedded parameters when unlocked and edited at run time will not be saved permanently in the device.
This functionality is provided only to test the system during run time. To save parameters permanently, user
has to stop the program, move to edit mode & configure the system accordingly.
NOTE: In Run Mode, expansion (extension) module identities cannot be changed.
WE DIDN'T INVENT CONTROL, WE'RE PERFECTING IT.
I 12345678
SA
Q 1234 08:30
ESC
CONTINUE
I 12345678
OK
RESET
OK
SA
Q 1234 08:30
ESC
PROGRAM
OK
RUN
PARAMETERS
UTILITIES
D
TRG
T1
OK
RES
X
S
000.0
OF
S
006.0
OF
I 1 ----------[Q1
OK
I 2 ----------[Q2
I 3 ----------[Q3
Z1
Z2
Z3
Z4
MODBUS SETTINGS
SLAVE ID
1. Select the "PROGRAM" option from the main menu and press OK.
2. Select the "MODBUS CON" option from the sub menu and press OK.
3. The cursor will blink on the first digit of the Slave ID (SLV ID).
4. Press ALT to edit the digit and the digit will now start blinking.
5. Using Up (Z4) and Down (Z2) keys select the appropriate digit.
6. Press Z3 to edit the other digit and using Up and Down keys select the digit.
7. Press OK to confirm the changes that have been made.
PROGRAM
EDIT
OK
OK
RUN
DELETE
PARAMETERS
TRANSFER
UTILITIES
MODBUS CON
SLV ID
101
SLV ID
101
Z3
BAUD
9600
BAUD
9600
Z4
PARITY
NONE
PARITY
NONE
STOPBIT
1
STOPBIT
1
BAUD RATE
8. Press Z3 to select Baud Rate (BAUD) and press ALT to edit.
9. Using Up (Z4) and Down (Z2) keys select the appropriate Baud Rate.
10. Press OK to confirm the changes that have been made.
SLV ID
111
SLV ID
101
Z3
BAUD
9600
BAUD
9600
Z4
PARITY
NONE
PARITY
NONE
STOPBIT
1
STOPBIT
1
PARITY
11. Press Z3 to select 'PARITY' and press ALT to edit.
12. Using Up (Z4) and Down (Z2) keys select the appropriate parity.
13. Press OK to confirm the changes that have been made.
SLV ID
111
SLV ID
101
Z3
BAUD
0300
BAUD
9600
Z4
PARITY
NONE
PARITY
NONE
STOPBIT
1
STOPBIT
1
STOP BITS
14. Press Z3 to select 'STOPBIT' and press ALT to edit.
15. Using Up (Z4) and Down (Z2) keys select the number of stop bits.
16. Press OK to confirm the changes that have been made.
SLV ID
111
SLV ID
111
Z3
Z4
BAUD
0300
BAUD
0300
PARITY
ODD
PARITY
ODD
STOPBIT
1
STOPBIT
1
17. Once all the changes have been made press OK to save and exit.
SLV ID
111
SAVING DATA
BAUD
0300
PARITY
ODD
STOPBIT
2
PARAMETER LOCK
When user edits parameter from text message and if parameter is locked then
the screen as shown below appears. To change that parameter user has to edit
that parameter in edit mode only.
PARAMETER
LOCKED
SLV ID
001
SLV ID
001
ALT
Z4
BAUD
9600
BAUD
9600
PARITY
NONE
PARITY NONE
STOPBIT
1
STOPBIT
1
SLV ID
111
SLV ID
111
OK
BAUD
9600
BAUD
9600
PARITY
NONE
PARITY NONE
STOPBIT
1
STOPBIT
1
SLV ID
111
SLV ID
111
OK
BAUD
0300
BAUD
0300
PARITY
NONE
PARITY NONE
STOPBIT
1
STOPBIT
1
SLV ID
111
SLV ID
111
OK
BAUD
0300
BAUD
0300
PARITY
ODD
PARITY ODD
STOPBIT
1
STOPBIT
1
SLV ID
111
SLV ID
111
OK
BAUD
0300
BAUD
0300
PARITY
ODD
PARITY ODD
STOPBIT
2
STOPBIT
2
EDIT
. . . WAIT
DELETE
TRANSFER
MODBUS CON